How to Replace Door Locks
It isn't easy to replace your door lock. It is important to keep your home secure from intruders, and to replace locks if you get an occupant change or you are letting out your home.
The majority of new locks are designed to fit standard door widths. If your door is wider, you'll need a "thick-door" kit that comes with longer screws and longer tail pieces for deadbolts.
Remove the old lock
You will need to remove the old lock from the door before you install the new lock. You can do this using a few simple tools, but be careful not to damage your door frame or door. Making use of the right tools can help you avoid costly repairs in the future.
Take off the screws that are on the trim and handle. You can use a screwdriver do this. Once the screws are removed, you can take off the trim. Then, you can remove the screw that binds the handle and trim to the door. After you have removed the screw, you can remove lock cylinder and open handle.
When you can't wiggle your keys inside, it is an indication that the lock is failing. This is due to the tumblers wearing out and then stopping the movement up or downward, causing the lock to stop working. You'll need to have the lock replaced by a locksmith in the event that this happens.
Start by removing the screws that hold the faceplate in position. If your kit does not include new screws, then you can purchase them from the hardware store. If you're installing a mortise lock you must also take out the screws that hold the external rose plate to the door. After you've removed all screws, take the dead bolt and the plate away from the door.
Then, look for a pinhole in the handle's interior trim. If you spot one, slide straightened safety pins into it. You can also employ a flat screwdriver press against the depression. This will release the handle and expose screws that can be removed to remove the entire lock case from the door.
Installing the new lock
Installing a new lock can be done with ease regardless of whether you wish to replace your lock following an attack, or simply want to update your door's appearance. It is important to measure the door in order to ensure that you purchase a new lock that is the correct size for your door. This is especially crucial for deadbolts that must be a certain size to fit in the strikeplate and pocket of the bolt. If you're not sure how to measure, ask for assistance at your local hardware store or locksmith.
If you're replacing a mortice use the existing centrerail as a guide to position the new mortise. Once you've marked the position of the lock, make holes along the centre line that are the same size as your lock. Then, chisel away the wood until you have a neat rectangular space for your mortice lock to sit in. Insert the lock, and then outline the faceplate using an outliner. Mark and drill screwholes to secure the faceplate.
upvc window lock mechanism replacement repairmywindowsanddoors.co.uk can save money on rekeying locks by purchasing an entry-level set that comes with a re-keyable key and an unlocked key. These kits are available from numerous online retailers as well as hardware and home improvement stores. The kits also come with instructions to assist you in completing your task.
Check your lease agreement if you are renting prior to changing locks. You may have to give the landlord the keys to the new locks. If this is the case, you could be required to remove the old lock and replace it with a standard lock. You can buy a basic lock from your nearest hardware retailer, or get a high-tech smart lock that connects to the Wi-Fi of your home and allows you to lock and unlock your door from afar. Schlage Smart Lock is compatible with all knobs and levers. It can also be connected to your smart home security hub which allows you to receive alerts when your door is opened or unlocked.
Installing a new lock
A broken lock can be a security risk, therefore it is crucial to replace it as fast as possible. It's a good thing that replacing locks for doors is a simple project that anyone can tackle. The first step is to disengage the lock that was previously installed from the door. The screws holding it in place are removed and the lock is removed. Depending on the type you are using, you might require an Allen wrench or screwdriver. After you have removed the lock that was previously used take all the parts and put them in a safe location.

Install the new lock on the door. Most kits include an image of a cardboard template that illustrates how the lock will fit on the door. If the template doesn't match your door, you can draw a line with a pencil around it or use a Chisel to remove extra material. Make sure that the interior latch plate aligns with the mortise opening once the new lock has been installed.
Be cautious not to over tighten the lock when you install it. This could cause the lock to rattle, or even break. If you have a lock that's keyed, make sure the spindle aligns with the hole on the knob. If it isn't, you can use a screwdriver to push the spindle through the lock and into the knob.
After you have completed installing the new lock, you can now put in the decorative base plate that is included with it. If the lock does not include an appropriate base plate you can buy one that is compatible with your hardware.
Test the new lock to confirm that it functions. This can be done by inserting the lock's key and turning the lock to make sure that it is able to open. If this doesn't work you need to contact a locksmith.
Rekeying your locks with professionals can also help prevent break-ins. This involves changing the internal tumblers on your locks to make it unreceptive to your old keys. This will ensure that your home is secure and give you peace of mind.
Testing the new lock
Installing a new lock is a great method to make sure that it functions exactly as you intended. This is why it's important to follow the instructions carefully. You may not be able unlock your door if you don't. If you're unsure of what to do, contact a professional locksmith for help. A locksmith can give you advice on the best locks for your home.
If you are having difficulty opening your lock, there could be an issue with the handle or latch. Try lubricating the latch with graphite or spraying it with WD-40. This can help fix the issue. You may have to replace the latch if it is damaged. latch is not working correctly.
Another possibility is that the lock has been installed incorrectly. The inner door handle clip can be broken or missing on the new lock. In this situation you need to grasp the handle from the inside and then insert the new clip made of plastic. After that, connect the handle to the lock and test its operation.
It's crucial to check the keypad after replacing the lock to make sure it is working correctly. You can test the keypad by inserting it into the lock and turning it. If the keypad is functioning correctly, it should be able to unlock and lock your door.
You should also check the deadbolt lock to see whether it's working properly. If it's not working properly, remove the latch from the door and take off the Phillips-head screws. Replace the deadbolt that was installed with the new one. Make sure you orient and load in the deadbolt lock in the correct way.
Spindle testing is an additional method to test the new lock. This can be done by inserting a screwdriver into the spindle. This test should be conducted before re-installing the lock to prevent any mistakes during installation.